News Archives » Foam Spray Application
Foam Spray Application
Watts Bar Nuclear Facility Gets Polyurethane Foam Roof and Acrylic Coatings

Jason Forrester of Finishing Solutions in Birmingham, AL was asked by Williams Industrial to for both a water-tight roof and a system that would offer a better insulation value on this 12,000 sq ft metal building at the Watts Bar Nuclear Facility in Sweetwater TN. Jason commented, “The work it takes in order to be able to enter this type of facility was more extensive than the project itself, but the successful completion of a project for a organization like Williams Industrial, in a facility such as this, will really help build our business down the road.”

Finishing Solutions first power-washed the metal panels, then applied 1.5” of Polyurethane Foam over the metal, which water-proofed the building and gave them an R11 plus the airtight value of SPF.

Finally they applied two coats of Acrylic 211 at a total rate of 3 gallons per 100 square feet to protect the foam from UV degradation. This SPF coating system should give this building at least ten years of water-tight protection and significantly help save on energy bills.

Job Location = Sweetwater TN
Customer = TVA -- Watts Bar Nuclear Facility
Substrate = 12,000 sq ft metal roof
AWS System Installed = 1.5” of Spray Polyurethane Foam top coated with two coats of Acrylic 211

Spray Foam Contractor

Jason Forrester
Finishing Solutions LLC
(205) 685-5348
(205)-685-5738
254 Strathaven Lane
Pelham, AL 35124
forrester1978@yahoo.com

Submitted by


Brian O'Donnell
American Weatherstar
2100 Government St.
Mobile AL 36606
800-771-6643
WWW.AMERICANWEATHERSTAR.COM


Email To Friend
Your Email:
Their Email:
Verification Information
Type in what you see above: *  
Verification Information

Please type the characters you see in this picture.   Note: The characters are all lower case.

 

News Archives Home   |   News   |   RSS Feeds
Public Announcements   |   Blogs   |   Columns / Newsletters   |   Letters
Submit A News Story   |   Contact The Editor